How to Install a Handheld Shower Head?

With a handheld shower head, the versatility of your shower remains a guarantee. You can get hot water on your painful joints or bathe while sitting down, particularly if you have mobility issues.

Installing a handheld shower is not a difficult task because a lot of models attach to your current shower arm with ease. Also, you can connect it to a tub spout with a specially designed diverter fitting.

Adapter kits come in various types – standard fitting, cross-tee diverter fitting, and tub spout diverter valve. A standard fitting connects to your current shower arm and takes the place of your out-of-date shower head with a handheld shower unit as well as a flexible hose. This can work as a static head or a handheld piece.

A cross-tee diverter fitting is compatible with your current shower head and comes with a handheld shower head unit as well as a hose as a backup. There are two outlets in the diverter T-fitting, one for linking the original shower head while the other is for linking the new handheld shower head and hose.

If you want to include a shower function but there is no current shower head, you will need to use a tub spout diverter valve. Typically, you will need to replace the out-of-date tub spout with a brand-new one that comes with a hand shower diverter.

Things You Will Need


  • Adjustable wrench or channel-lock pliers
  • Hex key (as needed)
  • Drill and bits (if needed)
  • Plumber’s pipe seal tape
  • Hand-held shower head kit
  • Tub spout with diverter (as needed)
  • A piece of heavy cloth or leather

Preparing For The Installation – Shower Head Removal


The replacement of a Standard Shower Head with a handheld system requires adequate preparation. Firstly, you need to take off the old shower head with the aid of an adaptable wrench or channel-type pliers.

Loosen the shower head nut by turning it in an anticlockwise direction. As you turn the nut, the head will turn, which is normal. You can protect the shower head’s finish by enveloping it in a piece of cloth before the application of the wrench.

Thereafter, get rid of mineral deposits, plumber’s pipe-seal tape or old pipe compound on the threads by cleaning it properly. Wrap a plumber’s tape in a clockwise direction around the threads four to five times. The tape will not allow the new shower fitting to leak after the installation.

How to Add a Handheld Shower Head Using a Standard Fitting


How to Add a Handheld Shower Head

You can use this method to attach a handheld shower to your current shower arm. This will replace the out-of-date shower head with a new shower unit and a flexible hose. Here is the step-by-step guide.

Step 1: Attach Shower Head Base

After the removal of the out-of-date shower head as described above, wrap the shower arm’s thread with plumber’s pipe seal tape.

Make sure that you wrap it around several times so that there won’t be any leakage after the installation. Use your hand to screw in the handheld shower head base to the shower arm, and secure it properly.

Step 2: Attach the Hose

You should wrap the plumber’s pipe seal tape around the shower head base’s cross-tee nipple. Thereafter, thread the ductile hose into the nipple, and tighten properly with your hand.

Step 3: Turn on the Water at the Faucet and Check for Leaks

If you discover any leakage at the connection point, you should use an adjustable wrench to re-tighten the point. Make sure you make use of a clean cloth to protect the finish before tightening with a wrench.

Step 4: Mount Wall Bracket If Applicable

This step is not compulsory but necessary if it is stated in the product’s manual. Hence, you should go through the manual properly so that there won’t be issues after the installation.

How to Add a Handheld Shower Using a Cross-Tee Diverter Fitting


You can use this method to install your handheld, and you will still have access to your current shower head. Here is the step-by-step guide.

Step 1: Install Cross-Tee Fitting

After the removal of the out-of-date shower head, as described above, you should clean the shower arm’s thread. Wrap plumber’s pipe seal tape around the shower arm’s threads. Thereafter, you should introduce the cross-tee fitting into the arm before tightening it with your hand.

Step 2: Reconnect the Shower Head

Wrap the tape around the cross-tee fitting’s thread before screwing the original shower head to the cross-tee diverter’s one outlet. Thereafter, you should use your hand to tighten it.

Step 3: Attach the Flexible Hose

Connect the handheld shower head’s flexible hose to the cross-tee diverter’s outer outlet. Secure it in place with your hand so as to get the most satisfactory result.

Step 4: Turn on the Water at the Faucet and Check for Leaks

If you discover any leakage at the connection point, you should use an adjustable wrench to re-tighten the point. You must ensure that you make use of a clean cloth to protect the finish before tightening with a wrench.

According to FurnitureandHome – You can easily get the Best Shower Head and also see the various types of model here.

How to Add a Hand-Held Shower Using a Tub Spout Diverter Valve


If you don’t have a shower head presently, a tub spout diverter will help you to install a handheld shower. Check out the step-by-step installation guide.

Step 1: Remove the Tub Spout

The first step you need to take is to remove the out-of-date tub spout. If the spout comes with a hex-head (Allen) setscrew, it is a slip-on type. This means you have to use a hex key (Allen wrench) to loosen the setscrew before sliding the spout off the pipe nipple that comes out of the wall.

If there is no setscrew on the spout, it is certainly a threaded type. This means you have to unscrew the spout in an anticlockwise direction with the aid of channel-lock pliers so that it detaches from the threaded nipple.

Step 2: Install a New Spout

You should buy a diverter-style tub spout with a similar attachment mechanism like the one you are replacing – either threaded or slip-on. For threaded spout, wrap the pipe-seal tape around the pipe nipple threads in a clockwise direction.

Thereafter, attach it to the stub-out pipe. For a slip-on design, make sure that you glide it over the stub-out pipe before tightening the setscrew using a hex key.

Step 3: Mount the Slide Bar

It’s now time for you to mount the handheld shower head’s slide bar or mounting bracket to the wall. You should follow the product’s instruction manual when doing this so as to get the most satisfactory result.

Step 4: Attach the Flexible Hose

Connect the flexible hose to the diverter valve’s nipple on the spout. Apply the pipe-seal tape around the nipple so as to secure it to place.